Wise Switch Receiver 240V 1 Channel 3000W

Product code WISEREC1CH 3000
£64.38 ex. VAT
The Wise 13A Switch Receiver is a single circuit switching relay rated at 3000 watts, designed to work with a 13A socket. Suitable for both 110V and 240V power.

It cannot be dimmed.

The receiver is small enough to be placed into a backbox behind a regular 13A socket, allowing you to switch high wattage devices wirelessly. It can also be positioned into an IP rated junction box and housed outside so you can control water features, garage doors and other lighting circuits from the comfort of your own home.

The Wise 13A Switch Receiver can be programmed in many different ways to fully utilise its full potential. Some of these functions include:

1 button switching - Switch the relay using a single button.

2 button switching - Switch the relay using a 2 button transmitter, separating the on and the off.

Scene setting - Scene set your high wattage devices along with your lighting circuits, giving you full automation. Can be used with either a 7 button or 4 button transmitter.

Timelag - Pre-set an automated time for the relay to turn off. There are 7 different options ranging from 15 seconds to 20 minutes. This is ideal for high powered security lighting which is only required for temporary time periods.

The Wise 13A Switch Receivers are designed to be simple to install, easy to use and most importantly, reliable. Any of the Wise 868 switches can be used with this receiver, including the remotes and modules. This receiver can also be used in conjunction with other Wise Scene receivers to offer full home automation.

Wise Controls Introduction Video

  • Wireless platform — no rewiring between switches and receivers
  • Programmed by button-press — no software, hub or app required to set up
  • Free installer training and UK technical support from the Wandsworth team
Free training available for installers — book a slot.

Specifications

Dimensions
Depth 25mm
Height 50mm
Width 50mm
Electrical
Maximum Wattage 3000W
Voltage 240V
General
Colour White
IP Rating IP20

Common questions

Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.