Wise Controls
Call 020 8874 2234
Wise Mouse Blind, Daylight Sensor Switch & Blind Receiver 24V 2 Channel Black Wise Mouse Blind, Daylight Sensor Switch & Blind Receiver 24V 2 Channel Black Wise Mouse Blind, Daylight Sensor Switch & Blind Receiver 24V 2 Channel Black

Wise Mouse Blind, Daylight Sensor Switch & Blind Receiver 24V 2 Channel Black

Product code WISEGBLIND 24KIT
£136.48 ex. VAT

This kit consists of the Wise Mouse Blind Switch Daylight Sensor & Wise Blind Receiver 24V

The Wise Mouse Blind Switch is a wireless two channel switch used to control blinds with daylight sensor.

Wireless switches can be used to control any of the receivers in the Wise Controls range. The function of the switch, and each of its buttons, depends upon the function of the wireless receiver it is programmed to. Therefore a single button can be used for a variety of functions including, but not restricted to, on/off,dimming or master off only.

Wireless control unit for 24V rolling shutter motors for integration into the rolling shutter casing. Open-stop-close function. Input for 1 dynamic push button.

Wireless control unit for 24V motors for Venetian blinds with openstop- close function. It allows regulating the inclination of the blinds. Input for command through an external push button.

Two operating ways are possible:

Short impulses (from 50 to 300ms), the partial inclination of the position of the Venetian blinds both in the opening and in the closing directions.

Impulses longer that 300ms, the complete automatic movement of the Venetian blinds in the opening and in the closing directions.

Wise Controls Introduction Video

  • Wireless platform — no rewiring between switches and receivers
  • Programmed by button-press — no software, hub or app required to set up
  • Free installer training and UK technical support from the Wandsworth team
Find a stockist Enquire about this product
Free training available for installers — book a slot.

Specifications

Radio Frequency 868.3 MHz
Dimensions
Depth 25mm
Height 80mm
Width 80mm
Electrical
Maximum Wattage 400W
Voltage 24V
General
Colour Black
Construction Plastic
IP Rating IP20

Downloads

Common questions

Do I need Wi-Fi for this to work?
No. The Wise platform runs on radio frequency (RF), independent of your home Wi-Fi or broadband. The system continues to function during internet outages.
Is special programming software required?
No software, hub or laptop is needed for standard setup. Pairing is done by pressing buttons on the receiver and transmitter in sequence — any qualified installer or competent homeowner can do it.
Can I add this to an existing Wise installation?
Yes. Any new Wise receiver or transmitter pairs directly with existing kit. There's no version lock — Wise Box receivers, Scene controllers and Fusion dimmers all live on the same RF platform regardless of generation.
Does it need a qualified electrician to install?
Wireless transmitters (keypads, remotes, PIRs) can be installed by a competent person without mains work. Receivers and dimmers wire into the mains supply and must be installed by a qualified electrician. Free training is available — see our training page.
Where can I buy it?
Wise Controls equipment is sold through authorised electrical wholesalers nationwide — see our stockists page for the full list, or contact us for the closest distributor to your project.

Complete the look

Other products in the Sensors range that pair with this one.